p2np nabh4 amphetamine synthesis question

[TucoSalamanca.]

Can you make molar calculation of p2np nabh4 amphetamine synthesis with 3gr

 

[TucoSalamanca.]

IPA 40-50 ml
H2O 12,5 ml
NaBH4 3,5 g
P2NP 2 g
CuCl2 +-0,2 g
NaOH (25% water solution) 16 ml
Acetone (dry) 5-10 ml
In this case, how many ml of ipa and h2o should I use and how many ml of water should I make a solution of copper chloride 200mg

 

[TucoSalamanca.]

IPA 40-50 ml
H2O 12,5 ml
NaBH4 3,5 g
P2NP 2 g
CuCl2 +-0,2 g
NaOH (25% water solution) 16 ml
Acetone (dry) 5-10 ml
In this case, how many ml of ipa and h2o should I use and how many ml of water should I make a solution of copper chloride 200mg

TucoSalamanca.at first when I add ipa in synthesis how many ml h2o how many ml liquid liquid extraction how many ml ipa will I use and do I need to add water to copper chloride do I have copper chloride 200mg

 

[TucoSalamanca.]

?????

 

[TucoSalamanca.]

G.Patton​

WillD​

HIGGS BOSSON​

GhostChemist​

 

[SoldadoDeDrogas]

Find the moles for the reactants and do math from there.

 

[TucoSalamanca.]

170.48 divided by 44.01 I got 3.87 I multiplied 3.87 by 2.5 I will use 9.6 ml h2o

 

[SoldadoDeDrogas]

I am not exercising the dilligence of doing the math also, but double check. The reactant proportions in your recipe for which you are following, converted into moles. Figure out the ratio and apply that to your solvents. If it was originally for 2g of CuCl2 then, of course, 200mg is %10 of that. So then find %10 of the portion of solvent you are instructed to use. That one ratio needs to be applied to all portions of all ingredients to have the same exact amounts. Technically, moles need not be calculated, but it is good practice, and verifies your work up.

((((( IPA 40-50 ml
H2O 12,5 ml
NaBH4 3,5 g
P2NP 2 g
CuCl2 +-0,2 g
NaOH (25% water solution) 16 ml
Acetone (dry) 5-10 ml
In this case, how many ml of ipa and h2o should I use and how many ml of water should I make a solution of copper chloride 200mg ))))) <-- Where did you get these portions? This looks like a customized micro batch?

CuCl2 is already 0.2g in the portion list so it says to use, whatever, 40-50ml IPA and 12.5ml H2O. I am confused, Are these not already calculated?

 

[TucoSalamanca.]

I am not exercising the dilligence of doing the math also, but double check. The reactant proportions in your recipe for which you are following, converted into moles. Figure out the ratio and apply that to your solvents. If it was originally for 2g of CuCl2 then, of course, 200mg is %10 of that. So then find %10 of the portion of solvent you are instructed to use. That one ratio needs to be applied to all portions of all ingredients to have the same exact amounts. Technically, moles need not be calculated, but it is good practice, and verifies your work up.

((((( IPA 40-50 ml
H2O 12,5 ml
NaBH4 3,5 g
P2NP 2 g
CuCl2 +-0,2 g
NaOH (25% water solution) 16 ml
Acetone (dry) 5-10 ml
In this case, how many ml of ipa and h2o should I use and how many ml of water should I make a solution of copper chloride 200mg ))))) <-- Where did you get these portions? This looks like a customized micro batch?

CuCl2 is already 0.2g in the portion list so it says to use, whatever, 40-50ml IPA and 12.5ml H2O. I am confused, Are these not already calculated?

SoldadoDeDrogascan you rewrite all the calculations

 

[SoldadoDeDrogas]

That is what I am trying to figure out, I will help you make sure it is correct if you need. If you are just using it for a 'liquid/liquid' extraction then it is probably unnecessary work - just eyeball it, you can't really screw it up with amount, just don't over do it.

What calculations? What recipe instructions are you using for portions?

 

[TucoSalamanca.]

That is what I am trying to figure out, I will help you make sure it is correct if you need. If you are just using it for a 'liquid/liquid' extraction then it is probably unnecessary work - just eyeball it, you can't really screw it up with amount, just don't over do it.

What calculations? What recipe instructions are you using for portions?

SoldadoDeDrogasWill the copper chloride in my synthesis be 200 mg?

 

[SoldadoDeDrogas]

Will the copper chloride in my synthesis be 200 mg?

TucoSalamanca.I was asking you that, my friend. Where did you get these portions for the recipe? Are they yours? Or how were they figured? This is only going to make like a half gram of amph or something or other insignificant ...

 

[TucoSalamanca.]

I was asking you that, my friend. Where did you get these portions for the recipe? Are they yours? Or how were they figured? This is only going to make like a half gram of amph or something or other insignificant ...

SoldadoDeDrogasthe phantom chemist told me this calculation

 

[TucoSalamanca.]

I was asking you that, my friend. Where did you get these portions for the recipe? Are they yours? Or how were they figured? This is only going to make like a half gram of amph or something or other insignificant ...

SoldadoDeDrogasThe calculation is correct, the only thing I wonder is how much water will I dissolve with 200mg copper chloride

 

[SoldadoDeDrogas]

It says 12.5ml in what you posted, I am guessing, if that is accurate you know best. I wouldn't assume the amount is that critical as long as you don't over do it. What % solution does the CuCl2 need to be for the reaction? I'm probably not the guy who should be telling you anything about this, contact the phantom chemist, no? They're his instructions afterall.

 

[TucoSalamanca.]

please write an article about this calculation and how to do it
G.Patton
GhostChemist

 

[TucoSalamanca.]

my calculation on the p2np nabh4 amphetamine method
IPA 40-50 ml
H2O 12,5 ml
NaBH4 3.5 g
P2NP 2 g
CuCl2 +-0.2 g 9.675 H2o
NaOH (25% water solution) 16 ml
Acetone (dry) 5-10 ml
I first put ipa and h2o and mix for 2 minutes, then I add p2np, then I dissolve 0.200mg copper chloride in 5ml water and add it, but the temperature does not increase.

 

[TucoSalamanca.]

my calculation on the p2np nabh4 amphetamine method
IPA 40-50 ml
H2O 12,5 ml
NaBH4 3.5 g
P2NP 2 g
CuCl2 +-0.2 g 9.675 H2o
NaOH (25% water solution) 16 ml
Acetone (dry) 5-10 ml
I first put ipa and h2o and mix for 2 minutes, then I add p2np, then I dissolve 0.200mg copper chloride in 5ml water and add it, but the temperature does not increase.

TucoSalamanca.When adding p2np, the temperature increases, but when I dissolve 200mg copper chloride in 5ml water and add it, the temperature does not increase or do I need to turn on the heater?

 

[TucoSalamanca.]

How many ml of copper chloride 200mg will I dissolve in water and add 1ml? First I add ipa and water, then I add nabh4, then I add p2np so that it does not exceed 60 degrees, the temperature increases, but when I add copper chloride 200mg, the temperature does not increase, I dissolve it in 5ml water and add it, I make a reaction with a 2lt 3-neck glass balloon.