Trying to make C-Liquid

[Evolved]

I'm looking for a step by step guide on how to SAFELY make a C-Liquid as close to the normal THC high. I do not want to be vaping some of the fiendish noids. I have tried finding information on this topic everywhere but cant seem to find exact figures. Since dealing with such small dose values I need to make sure the exact amount of mg/ml ratio is safe. If anyone has any information on what is the best noid to use and exactly what dose to use it would be appreciated. I have only been able to find info on heating a powdered noid in a vg/pg solution until it has homogenized.
Any info is helpful. Thank you

 

[Paracelsus]

Are you interested in 5F-CUMYL-PINACA exactly? The problem with creating guides and selecting safe dosages is that today there is not even a definitive answer as to how much substances of this type have a stronger effect on cannabinoid receptors. For the voiced substance, for example different studies have shown different selectivity. The substance can be either 2 times selective, or almost 30 times. Add to this the different types of receptors and the smallest effective dosages. Perhaps that's why the answer to your question is not so simple. However, you can view the section dedicated to the synthesis of cannabinoids. Perhaps there is an answer or the right direction: http://bbzzzsvqcrqtki6umym6itiixfhni37ybtt7mkbjyxn2pgllzxf2qgyd.onion/b/cannabinoids.5/

 

[Evolved]

Are you interested in 5F-CUMYL-PINACA exactly? The problem with creating guides and selecting safe dosages is that today there is not even a definitive answer as to how much substances of this type have a stronger effect on cannabinoid receptors. For the voiced substance, for example different studies have shown different selectivity. The substance can be either 2 times selective, or almost 30 times. Add to this the different types of receptors and the smallest effective dosages. Perhaps that's why the answer to your question is not so simple. However, you can view the section dedicated to the synthesis of cannabinoids. Perhaps there is an answer or the right direction: http://bbzzzsvqcrqtki6umym6itiixfhni37ybtt7mkbjyxn2pgllzxf2qgyd.onion/b/cannabinoids.5/

ParacelsusI am interested in using JWH-210 and was thinking of making a 45mg/1ml ratio. I was wondering if this would be safe. Most of the research I've done points to a dose of JWH-210 being 1.5mg-3mg and a ml of vape juice takes between 100-200 puffs. So if i want to make every 5 puffs an effective dose at the average 150 puffs I would get 30 doses. If i want every dose to be 3mg it would be 90mg/ml. However im not sure if this is safe. If you know anything about this it would be helpful. If not I will start off with a very low mg/ml like 20mg/ml and work my way up. Also if you know any exact way to get the mixture to homogenize that would be helpful too. I've seen heating up the mixture and stirring thoroughly is the best way but I am not positive on that. Ive read through the cannibinoid forums loads none of the information there really applies.
Thanks for your reply

 

[G.Patton]

I've seen heating up the mixture and stirring thoroughly is the best way but I am not positive on that.

EvolvedI think it is the best way. In my opinion, you have the right direction in your research. Share us your results, please.

 

[Evolved]

Will do. I dont see any other posts about making C-Liquid anywhere so I will make an in depth guide of my trial and error. I am going to start on low dose liquid and work my way up to find a desired strength.